:h usr_29.txt

usr_29.txt For Vim version 7.4. Last change: 2008 Jun 28LINK

VIM USER MANUAL - by Bram Moolenaar

Moving through programs

The creator of Vim is a computer programmer. It's no surprise that Vim

contains many features to aid in writing programs. Jump around to find where

identifiers are defined and used. Preview declarations in a separate window.

There is more in the next chapter.

29.1 Using tags

29.2 The preview window

29.3 Moving through a program

29.4 Finding global identifiers

29.5 Finding local identifiers

Next chapter: usr_30.txt Editing programs

Previous chapter: usr_28.txt Folding

Table of contents: usr_toc.txt

==============================================================================

29.1 Using tagsLINK

What is a tag? It is a location where an identifier is defined. An example

is a function definition in a C or C++ program. A list of tags is kept in a

tags file. This can be used by Vim to directly jump from any place to the

tag, the place where an identifier is defined.

To generate the tags file for all C files in the current directory, use the

following command:

ctags *.c

"ctags" is a separate program. Most Unix systems already have it installed.

If you do not have it yet, you can find Exuberant ctags here:

http://ctags.sf.net

Now when you are in Vim and you want to go to a function definition, you can

jump to it by using the following command:

:tag startlist

This command will find the function "startlist" even if it is in another file.

The CTRL-] command jumps to the tag of the word that is under the cursor.

This makes it easy to explore a tangle of C code. Suppose, for example, that

you are in the function "write_block". You can see that it calls

"write_line". But what does "write_line" do? By placing the cursor on the

call to "write_line" and pressing CTRL-], you jump to the definition of this

function.

The "write_line" function calls "write_char". You need to figure out what

it does. So you position the cursor over the call to "write_char" and press

CTRL-]. Now you are at the definition of "write_char".

+-------------------------------------+

|void write_block(char **s; int cnt) |

|{ |

| int i; |

| for (i = 0; i < cnt; ++i) |

| write_line(s[i]); |

|} | |

+-----------|-------------------------+

CTRL-] |

| +----------------------------+

+--> |void write_line(char *s) |

|{ |

| while (*s != 0) |

| write_char(*s++); |

|} | |

+--------|-------------------+

CTRL-] |

| +------------------------------------+

+--> |void write_char(char c) |

|{ |

| putchar((int)(unsigned char)c); |

|} |

+------------------------------------+

The ":tags" command shows the list of tags that you traversed through:

:tags

# TO tag FROM line in file/text

1 1 write_line 8 write_block.c

2 1 write_char 7 write_line.c

Now to go back. The CTRL-T command goes to the preceding tag. In the example

above you get back to the "write_line" function, in the call to "write_char".

This command takes a count argument that indicates how many tags to jump

back. You have gone forward, and now back. Let's go forward again. The

following command goes to the tag on top of the list:

:tag

You can prefix it with a count and jump forward that many tags. For example:

":3tag". CTRL-T also can be preceded with a count.

These commands thus allow you to go down a call tree with CTRL-] and back

up again with CTRL-T. Use ":tags" to find out where you are.

SPLIT WINDOWS

The ":tag" command replaces the file in the current window with the one

containing the new function. But suppose you want to see not only the old

function but also the new one? You can split the window using the ":split"

command followed by the ":tag" command. Vim has a shorthand command that does

both:

:stag tagname

To split the current window and jump to the tag under the cursor use this

command:

CTRL-W ]

If a count is specified, the new window will be that many lines high.

MORE TAGS FILES

When you have files in many directories, you can create a tags file in each of

them. Vim will then only be able to jump to tags within that directory.

To find more tags files, set the 'tags' option to include all the relevant

tags files. Example:

:set tags=./tags,./../tags,./*/tags

This finds a tags file in the same directory as the current file, one

directory level higher and in all subdirectories.

This is quite a number of tags files, but it may still not be enough. For

example, when editing a file in "~/proj/src", you will not find the tags file

"~/proj/sub/tags". For this situation Vim offers to search a whole directory

tree for tags files. Example:

:set tags=~/proj/**/tags

ONE TAGS FILE

When Vim has to search many places for tags files, you can hear the disk

rattling. It may get a bit slow. In that case it's better to spend this

time while generating one big tags file. You might do this overnight.

This requires the Exuberant ctags program, mentioned above. It offers an

argument to search a whole directory tree:

cd ~/proj

ctags -R .

The nice thing about this is that Exuberant ctags recognizes various file

types. Thus this doesn't work just for C and C++ programs, also for Eiffel

and even Vim scripts. See the ctags documentation to tune this.

Now you only need to tell Vim where your big tags file is:

:set tags=~/proj/tags

MULTIPLE MATCHES

When a function is defined multiple times (or a method in several classes),

the ":tag" command will jump to the first one. If there is a match in the

current file, that one is used first.

You can now jump to other matches for the same tag with:

:tnext

Repeat this to find further matches. If there are many, you can select which

one to jump to:

:tselect tagname

Vim will present you with a list of choices:

# pri kind tag file

1 F f mch_init os_amiga.c

mch_init()

2 F f mch_init os_mac.c

mch_init()

3 F f mch_init os_msdos.c

mch_init(void)

4 F f mch_init os_riscos.c

mch_init()

Enter nr of choice (<CR> to abort):

You can now enter the number (in the first column) of the match that you would

like to jump to. The information in the other columns give you a good idea of

where the match is defined.

To move between the matching tags, these commands can be used:

:tfirst go to first match

:[count]tprevious go to [count] previous match

:[count]tnext go to [count] next match

:tlast go to last match

If [count] is omitted then one is used.

GUESSING TAG NAMES

Command line completion is a good way to avoid typing a long tag name. Just

type the first bit and press <Tab>:

:tag write_<Tab>

You will get the first match. If it's not the one you want, press <Tab> until

you find the right one.

Sometimes you only know part of the name of a function. Or you have many

tags that start with the same string, but end differently. Then you can tell

Vim to use a pattern to find the tag.

Suppose you want to jump to a tag that contains "block". First type

this:

:tag /block

Now use command line completion: press <Tab>. Vim will find all tags that

contain "block" and use the first match.

The "/" before a tag name tells Vim that what follows is not a literal tag

name, but a pattern. You can use all the items for search patterns here. For

example, suppose you want to select a tag that starts with "write_":

:tselect /^write_

The "^" specifies that the tag starts with "write_". Otherwise it would also

be found halfway a tag name. Similarly "$" at the end makes sure the pattern

matches until the end of a tag.

A TAGS BROWSER

Since CTRL-] takes you to the definition of the identifier under the cursor,

you can use a list of identifier names as a table of contents. Here is an

example.

First create a list of identifiers (this requires Exuberant ctags):

ctags --c-types=f -f functions *.c

Now start Vim without a file, and edit this file in Vim, in a vertically split

window:

vim

:vsplit functions

The window contains a list of all the functions. There is some more stuff,

but you can ignore that. Do ":setlocal ts=99" to clean it up a bit.

In this window, define a mapping:

:nnoremap <buffer> <CR> 0ye<C-W>w:tag <C-R>"<CR>

Move the cursor to the line that contains the function you want to go to.

Now press <Enter>. Vim will go to the other window and jump to the selected

function.

RELATED ITEMS

You can set 'ignorecase' to make case in tag names be ignored.

The 'tagbsearch' option tells if the tags file is sorted or not. The default

is to assume a sorted tags file, which makes a tags search a lot faster, but

doesn't work if the tags file isn't sorted.

The 'taglength' option can be used to tell Vim the number of significant

characters in a tag.

When you use the SNiFF+ program, you can use the Vim interface to it sniff.

SNiFF+ is a commercial program.

Cscope is a free program. It does not only find places where an identifier is

declared, but also where it is used. See cscope.

==============================================================================

29.2 The preview windowLINK

When you edit code that contains a function call, you need to use the correct

arguments. To know what values to pass you can look at how the function is

defined. The tags mechanism works very well for this. Preferably the

definition is displayed in another window. For this the preview window can be

used.

To open a preview window to display the function "write_char":

:ptag write_char

Vim will open a window, and jumps to the tag "write_char". Then it takes you

back to the original position. Thus you can continue typing without the need

to use a CTRL-W command.

If the name of a function appears in the text, you can get its definition

in the preview window with:

CTRL-W }

There is a script that automatically displays the text where the word under

the cursor was defined. See CursorHold-example.

To close the preview window use this command:

:pclose

To edit a specific file in the preview window, use ":pedit". This can be

useful to edit a header file, for example:

:pedit defs.h

Finally, ":psearch" can be used to find a word in the current file and any

included files and display the match in the preview window. This is

especially useful when using library functions, for which you do not have a

tags file. Example:

:psearch popen

This will show the "stdio.h" file in the preview window, with the function

prototype for popen():

FILE *popen __P((const char *, const char *));

You can specify the height of the preview window, when it is opened, with the

'previewheight' option.

==============================================================================

29.3 Moving through a programLINK

Since a program is structured, Vim can recognize items in it. Specific

commands can be used to move around.

C programs often contain constructs like this:

#ifdef USE_POPEN

fd = popen("ls", "r")

#else

fd = fopen("tmp", "w")

#endif

But then much longer, and possibly nested. Position the cursor on the

"#ifdef" and press %. Vim will jump to the "#else". Pressing % again takes

you to the "#endif". Another % takes you to the "#ifdef" again.

When the construct is nested, Vim will find the matching items. This is a

good way to check if you didn't forget an "#endif".

When you are somewhere inside a "#if" - "#endif", you can jump to the start

of it with:

If you are not after a "#if" or "#ifdef" Vim will beep. To jump forward to

the next "#else" or "#endif" use:

These two commands skip any "#if" - "#endif" blocks that they encounter.

Example:

#if defined(HAS_INC_H)

a = a + inc();

# ifdef USE_THEME

a += 3;

# endif

set_width(a);

With the cursor in the last line, "[#" moves to the first line. The "#ifdef"

- "#endif" block in the middle is skipped.

MOVING IN CODE BLOCKS

In C code blocks are enclosed in {}. These can get pretty long. To move to

the start of the outer block use the "[[" command. Use "][" to find the end.

This assumes that the "{" and "}" are in the first column.

The "[{" command moves to the start of the current block. It skips over

pairs of {} at the same level. "]}" jumps to the end.

An overview:

function(int a)

+-> {

| if (a)

| +-> {

[[ | | for (;;) --+

| | +-> { |

| [{ | | foo(32); | --+

| | [{ | if (bar(a)) --+ | ]} |

+-- | +-- break; | ]} | |

| } <-+ | | ][

+-- foobar(a) | |

} <-+ |

} <-+

When writing C++ or Java, the outer {} block is for the class. The next level

of {} is for a method. When somewhere inside a class use "[m" to find the

previous start of a method. "]m" finds the next start of a method.

Additionally, "[]" moves backward to the end of a function and "]]" moves

forward to the start of the next function. The end of a function is defined

by a "}" in the first column.

int func1(void)

{

return 1;

+----------> }

[] | int func2(void)

| +-> {

| [[ | if (flag)

start +-- +-- return flag;

| ][ | return 2;

| +-> }

]] |

| int func3(void)

+----------> {

return 3;

}

Don't forget you can also use "%" to move between matching (), {} and [].

That also works when they are many lines apart.

MOVING IN BRACES

The "[(" and "])" commands work similar to "[{" and "]}", except that they

work on () pairs instead of {} pairs.

[(

<--------------------------------

<-------

if (a == b && (c == d || (e > f)) && x > y)

-------------->

-------------------------------->

])

MOVING IN COMMENTS

To move back to the start of a comment use "[/". Move forward to the end of a

comment with "]/". This only works for /* - */ comments.

+-> +-> /*

| [/ | * A comment about --+

[/ | +-- * wonderful life. | ]/

| */ <-+

+-- foo = bar * 3; --+

| ]/

/* a short comment */ <-+

==============================================================================

29.4 Finding global identifiersLINK

You are editing a C program and wonder if a variable is declared as "int" or

"unsigned". A quick way to find this is with the "[I" command.

Suppose the cursor is on the word "column". Type:

Vim will list the matching lines it can find. Not only in the current file,

but also in all included files (and files included in them, etc.). The result

looks like this:

structs.h

1: 29 unsigned column; /* column number */

The advantage over using tags or the preview window is that included files are

searched. In most cases this results in the right declaration to be found.

Also when the tags file is out of date. Also when you don't have tags for the

included files.

However, a few things must be right for "[I" to do its work. First of all,

the 'include' option must specify how a file is included. The default value

works for C and C++. For other languages you will have to change it.

LOCATING INCLUDED FILES

Vim will find included files in the places specified with the 'path'

option. If a directory is missing, some include files will not be found. You

can discover this with this command:

:checkpath

It will list the include files that could not be found. Also files included

by the files that could be found. An example of the output:

--- Included files not found in path ---

<io.h>

vim.h -->

<functions.h>

The "io.h" file is included by the current file and can't be found. "vim.h"

can be found, thus ":checkpath" goes into this file and checks what it

includes. The "functions.h" and "clib/exec_protos.h" files, included by

"vim.h" are not found.

Note:

Vim is not a compiler. It does not recognize "#ifdef" statements.

This means every "#include" statement is used, also when it comes

after "#if NEVER".

To fix the files that could not be found, add a directory to the 'path'

option. A good place to find out about this is the Makefile. Look out for

lines that contain "-I" items, like "-I/usr/local/X11". To add this directory

use:

:set path+=/usr/local/X11

When there are many subdirectories, you can use the "*" wildcard. Example:

:set path+=/usr/*/include

This would find files in "/usr/local/include" as well as "/usr/X11/include".

When working on a project with a whole nested tree of included files, the "**"

items is useful. This will search down in all subdirectories. Example:

:set path+=/projects/invent/**/include

This will find files in the directories:

/projects/invent/include

/projects/invent/main/include

/projects/invent/main/os/include

etc.

There are even more possibilities. Check out the 'path' option for info.

If you want to see which included files are actually found, use this

command:

:checkpath!

You will get a (very long) list of included files, the files they include, and

so on. To shorten the list a bit, Vim shows "(Already listed)" for files that

were found before and doesn't list the included files in there again.

JUMPING TO A MATCH

"[I" produces a list with only one line of text. When you want to have a

closer look at the first item, you can jump to that line with the command:

[<Tab>

You can also use "[ CTRL-I", since CTRL-I is the same as pressing <Tab>.

The list that "[I" produces has a number at the start of each line. When you

want to jump to another item than the first one, type the number first:

3[<Tab>

Will jump to the third item in the list. Remember that you can use CTRL-O to

jump back to where you started from.

RELATED COMMANDS

[i only lists the first match

]I only lists items below the cursor

]i only lists the first item below the cursor

FINDING DEFINED IDENTIFIERS

The "[I" command finds any identifier. To find only macros, defined with

"#define" use:

Again, this searches in included files. The 'define' option specifies what a

line looks like that defines the items for "[D". You could change it to make

it work with other languages than C or C++.

The commands related to "[D" are:

[d only lists the first match

]D only lists items below the cursor

]d only lists the first item below the cursor

==============================================================================

29.5 Finding local identifiersLINK

The "[I" command searches included files. To search in the current file only,

and jump to the first place where the word under the cursor is used:

Hint: Goto Definition. This command is very useful to find a variable or

function that was declared locally ("static", in C terms). Example (cursor on

"counter"):

+-> static int counter = 0;

| int get_counter(void)

gD | {

| ++counter;

+-- return counter;

}

To restrict the search even further, and look only in the current function,

use this command:

This will go back to the start of the current function and find the first

occurrence of the word under the cursor. Actually, it searches backwards to

an empty line above a "{" in the first column. From there it searches forward

for the identifier. Example (cursor on "idx"):

int find_entry(char *name)

{

+-> int idx;

gd | for (idx = 0; idx < table_len; ++idx)

| if (strcmp(table[idx].name, name) == 0)

+-- return idx;

}

==============================================================================

Next chapter: usr_30.txt Editing programs